Headstock Bearings and Seals: Honda TLM50 TLM 50 (1985) Kawasaki KH250 To replace: 30500-GB4-003

To replace: 30500-GB4-003

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings with part no 91015-425-832 on a CR125 for the years and models shown above

This ignition coil has been manufactured to replace the original coil pack on a Honda XR650 for the years and models shown above

You will not be disappointed with this coil

Honda TRX 450 R (2004-2009)

Headstock Bearings and Seals: Honda TLM50 TLM 50 (1985) Kawasaki KH250 To replace: 30500-GB4-003Brand new set of headstock steering bearings and seals to fit: Honda TLM 50 (1985). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda TLM50 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different sizes