RANSBURG A12061-00 Bell Cup/Combo Wrench for 65mm Bell Cups only 3712 PSI Specifications:Pump Ratio: 1:1Volumetric Flow: 13

Specifications:Pump Ratio: 1:1Volumetric Flow: 13

25N093 – 5″ Medium Carbide Flail Drum

pump and gun air controls

2525DD is superseded by 25N634

OTHER Fully adjustable pressure regulator and temperature controller

RANSBURG A12061-00 Bell Cup/Combo Wrench for 65mm Bell Cups only 3712 PSI Specifications:Pump Ratio: 1:1Volumetric Flow: 13RANSBURG A12061 00 WRENCH, BELL CUP (65MM SWIRL) This tool is meant to aid in the removal of bell cups that are abnormally tight on the spindle shaft. To prevent bell cups from becoming difficult to remove, care should be taken to remove wet old dried paint from shaft and bell cup taper and threads before bell cups are assembled to the atomizer.